Alpha POS | POS Systems | Wireless-N Access Point

Alpha POS - Wireless-N Access Point

Available for: Hospitality & Retail POS

The Alpha POS Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g), and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the access point easy to install - you can mount it anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.

Moreover, the integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

To protect your data and privacy, the Alpha POS Wireless-N Access Point supports the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you apprised of access attempts. The rogue access point detection capability notifies the administrator when an unauthorized access point is detected in the airspace. The WPS (Wi-Fi Protected Setup) feature facilitates simple and secure deployment of security in the wireless network. Configuration is a snap with the web browser-based configuration utility.

The Alpha POS Wireless-N Access Point is the best way to add wireless access to your existing business network.
• Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b and g devices
• Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
• Protects business information with enhanced security, including rogue access point detection, advanced encryption, and select access filters
• Simplifies installation and configuration with easy-to-use web interface


Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM
Ports: Ethernet, Power
Buttons: Reset
Cabling type: Unshielded twisted pair (UTP) Category 5e or higher
LEDs: Power, Ethernet, Wireless
Operating system: Linux
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Dynamic Host Configuration Protocol (DHCP) client: Yes
SNMP versions: 1 and 2c
Event logging: Event logging, Email logging, Remote syslog
Web firmware upgrade: Firmware upgradeable through web browser
Diagnostics: Flash, RAM, LAN, WLAN
Dynamic Host Configuration Protocol (DHCP): DHCP client
HTTP Redirect: Redirects initial user access to an external web server to display company logo or network usage policy
IPv6 host: Support for management and control of access point over IPv6, Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)
Multiple BSSID: Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points
VLANs: Supports 802.1q - up to 4 VLANs
SSID to VLAN mapping: Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains
Spanning Tree: Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system
Operating modes: Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode
Load balancing: Allows bandwidth control with user-defined CPU usage ratios
Auto-channel selection: On boot-up, the access point selects the least congested channel
802.11d regulatory domain: Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains
WEP/WPA/WPA2: Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT
Access control: Wireless connection control: MAC-based
SSID broadcast: SSID broadcast enable/disable
Client isolation: Supports wireless client isolation between and within SSIDs
802.1X: Wireless clients can be authenticated through IEEE 802.1X
802.1X supplicant: Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network
RADIUS server: Up to 2 RADIUS servers can be configured for redundancy purposes
WPS: Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network
Rogue access point detection: New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network
• 4 queues
• 802.1p VLAN priority
• WMM wireless priority
• Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS
• Spec/modulation: Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM
• Channels: Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
• Internal antennas: None
• External antennas: 3 (omnidirectional)
• Transmit power: Transmit power @ normal temp range for FCC:
• 802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX
• 802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX
• 802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14,
• 11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0~5/8~13,
• 16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15,
• 21.5 dBm @ 3TX@MCS0~5/8~13, 17.5 dBm @ 3TX @ MCS6/14,
• 15.5 dBm @ 3TX @ MCS7/15
• Transmit power @ normal temp range for ETSI:
• 11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX
Antenna gain in dBi: 2v Receiver sensitivity
•802.11.n: 300 Mbps at -69dBm
•802.11.g: 54 Mbps at -73dBm
•802.11.b: 11 Mbps at -88dBm
Dimensions (W x H x D): 6.69 x 6.69 x 1.60 in. (170 x 170 x 40.7 mm)
Weight: 0.86 lb (39 kg)
• 12V 1A DC input, and IEEE 802.3af compliant PoE
• Max power draw: 10.1W
Certification: FCC, CE, IC
Operating temperature: 32° to 104°F (0° to 40°C)
Storage temperature: -4° to 158°F (-20° to 70°C)
Operating humidity: 10% to 85%, noncondensing
Storage humidity: 5% to 90%, noncondensing
Contact Us - Qwiki - contact form
* * *
* * *
*Is this a new business? Yes No
Optional POS Accessories
Alpha POS Services

Nationwide Installations
At Alpha POS Services, we understand that purchasing a POS system for your business is a large investment. You want to be certain that your purchase is backed and installed by a team of qualified installation technicians. Alpha POS Services is staffed to support your purchase with a team of technicians and nationwide installation specialists, no matter where you’re located.